Trackless transfer vehicle

Die trackless transfer vehicle project
A customer in Xi’an customized a trackless transfer vehicle of our company with a load capacity of 50 tons. The load safety factor of the transfer vehicle is 1.2. The mold transfer vehicle is powered by a battery, which is safe and environmentally friendly.
There is a 50-ton mold on the customer site, and the transfer vehicle is required to transfer the mold in the workshop. The customer uses the crane to transfer the mold. However, because of the limitations of the vehicle, it is considered a trackless transfer vehicle. The use of a trackless transfer vehicle can be used in the workshop 36 Transshipment without dead ends can greatly improve work efficiency.

1 – 300t load capacity motorized transfer trolley
Small tonnage coil transfer vehicle
Trackless transfer vehicle weight: 2 tons
Trackless transfer vehicle steering mode: differential steering
Trolleybus power supply mode: battery power supply
Trolley truck running time: 8 hours
Other requirements: install V-shaped frame on the countertop
The purpose of the trackless transfer vehicle: the customer’s workshop turnover goods, considering the wireless instability, after the inspection, the trackless transfer vehicle is purchased, the site is not restricted, and it is more mobile.

Self-propelled trackless transfer vehicle case
A customer in Jinan, operating elevators, loading and unloading trucks, etc., customized a trackless truck from our company. The load capacity of the trackless truck is 10 tons, and the flat car is powered by a battery pack.
The custom-made trackless transfer vehicle is mainly used for walking in the workshop, transporting port plates and steel bars, and realizing free walking in the workshop without restriction. The trackless transfer vehicle has such characteristics, so the trackless transfer vehicle of our company is used.

Workshop intelligent material handling vehicle

The intelligent truck has a load capacity of 5 tons. It is powered by a conventional battery. The charging voltage is 220v. It can run for 4-5 hours at full load. This project is mainly used in the workshop. The running ground is flat. The trolley transports the materials in the workshop and is used as a straddle car.

The trackless electric handling vehicle is a battery-powered energy source, and a DC motor drives an environmentally friendly transportation vehicle on the ground.

It is suitable for cargo transportation, loading or towing in the factory area. Simple operation, convenient maintenance, stable performance, reliable quality, clean and hygienic, low operating noise, economical adaptation.

Battery-powered trackless transfer vehicle Workshop trolley cars are commonly used handling equipment in workshops and factories. Compared with rail cars, there is no need to lay tracks. Because the trackless transfer vehicle can move freely, it can rotate 360 degrees on the spot, and the cost is low, and it is favored by many factories and workshops. The trackless transfer vehicle is not restricted by the track, and there are a variety of power supply methods. The more common power supply method is the battery. Lithium batteries are slightly more expensive than batteries and slightly inferior to batteries because of their price.

Trackless transfer vehicle for transferring containers The 25-ton trackless transfer platform truck has a large table size. The customer is mainly used for the transfer of containers and large generator sets. The table uses aluminum checkered plates and the battery is powered by battery packs. There are audible and visual alarms when the trolley is driving, and it stops when encountering obstacles to improve safety. The trackless transfer vehicle adopts electromagnetic brakes, which can be automatically powered off when fully charged, and can be charged intelligently. Omron Optoelectronics will stop when someone encounters a person, and it can realize 360-degree free rotation of forward and backward left and right turns. There are two operation modes: wired handle and wireless remote control.

Turn table and Battery operated trolly The 3 ton trackless transfer vehicle is used in the workshop to transport materials, from the workshop to the finished product warehouse, instead of forklifts, which is convenient, safe and efficient

Trackless Transfer Platform Vehicle With Table Insulation Treatm，Customized electrical switch high-voltage test transfer vehicle, this project purchases a total of two vehicles, the transfer vehicle is used as the electrical switch high-voltage test platform, so the transfer vehicle has been insulated on the table (insulation voltage ranges from 145v-1050v). The load capacity is 5 tons, the safety factor is 1.3, and it is used for epoxy floor. Use on hardened ground such as cement roads.

Battery DC Transfer Cart
BWP trackless flat cars are powered by batteries. The batteries are installed inside the electric flat cars. The batteries provide power to the DC traction motor. Commands such as start, stop, forward, reverse, turn left, turn right, and speed regulation are issued through the remote control. The electrical control system issues commands to the DC motor to drive the electric flat car to run various actions.
Product advantages
1. The trackless cross-span electric flat car has a large starting torque, stable driving, and a small turning radius, which can realize in-situ rotation, and can be freely transported indoors and outdoors under the condition of excellent ground flatness and no slope. The wireless remote control can remotely control the forward, reverse, turn and stop of the car, which is safe and easy to operate.
2. The trackless electric crossover flat car is powered by a battery, has no external power supply, and the rubber wheels do not need a track, and can turn 360° freely without being restricted by the track. The remote control handle is easy to operate, convenient and flexible, but it is not suitable for high frequency of use. High workplace.

Electric Motorized 2ton Transport Platform Vehicle
Customized 2 ton trackless transfer vehicle, customized table size is 2000*1500*500, battery provides power, and maintenance-free battery is selected. Steering mode, differential steering. It can run for eight hours on a single charge. Not limited by distance. The countertop is equipped with a V-shaped frame, which is used to transfer goods in the workshop. Because the route is unstable, the trolley is used. It is not limited by the track, and is not restricted by the site, walks freely, and is more maneuverable.

Transport heavy-duty steel trailers, flat cars can load 24 tons of goods, and the table size is longer. Customers are mainly used to transport goods on the dock. The main technical requirement is to be able to load heavier materials. Through communication, it is recommended Heavy-duty trailer.

A trackless handling flat car that is suitable for factories and can turn in multiple directions: This type of trolley is widely used and suitable for various industrial fields. It is flexible and convenient to use. It can turn 360 degrees on the spot, reduce the turning radius, and is not affected by the site. Limitations.

The Trackless transfer machine flatbed industrial transfer vehicle is a kind of industrial pallet truck, which adopts wheel design and can run without relying on rails. Generally used in various handling occasions, such as warehouses, workshops and other industrial occasions.,Product Name£ºTrackless transfer machine flatbed industrial transfer vehicle
Table size£¨mm£©£º3600¡Á2000
Product Weight (t)£º5.3
Wheel Quantity: 4
Motor power(kw): 5
Operation method: with wire or no wire